Bora MiteriX Angle Duplicator


  • GET A PERFECT ANGLE EVERY TIME – The Bora MiteriX Angle Duplicator tool is specifically designed to ensure that your miter cuts are at the perfect angle.

  • MEASURE, LOCK, THEN TRANSFER – You use the tool to measure the exact miter angle you need (right on your piece), then lock it, and transfer that exact angle to your Miter saw. Divides the angle in half for a perfect miter. It couldn’t be easier!

  • WORKS WITH ANY ANGLE – Measures internal or external angles from 0 - 180 degrees (miter angle from 0-90 degrees).

  • EASY STORAGE – Collapsible and foldable for easy storage in your tool box.

  • LIFETIME WARRANTY – this angle finder will be a mainstay in your workshop for years. 

  • 2016 ProTool Reviews Innovation Awards Winner

SKU: 530401

Availability: Out of stock


Additional Information

Demo Link No
  • .6 lbs
  • 7.5" Long
  • 2" Wide
  • 15" High
Prop 65 Warning No
PDF Info Sheet MiteriX_Sell_Sheet.pdf
Operator Manual PDF No
Youtube Links

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

One of the harder parts of carpentry and DIY projects is getting precise angles. With the Bora MiteriX Duplicator Tool, it becomes the easiest part of the job. This tool does exactly what you think it does – it precisely measures angles, than locks the angle (and even splits in half) to transfer that exact angle to your miter saw. This means your miter cuts will match precisely, without that unsightly gap that is all too common when measuring freehand. The great part about this is you can measure an existing angle on a piece of furniture, a corner in another room, etc, and then transfer that exact angle to your miter saw. So, for example, if you’re cutting crown molding, cornice molding, wood casing, base board, or trim for an existing piece, stair case, wall, and the angle you need isn’t a perfect-preset angle, this tool will save you hours of frustration, and will ensure you cut it right the first time. Will also work for table saw miter gauge setting. Best of all, you’ll buy this once, and use it forever, as it’s built to last, and has a lifetime warranty. Bora makes the best, and this angle measuring tool is no exception. Product collapsed measures 11” x 1.5” x 1.5”.


Now Available At Select Dealers Near You

Lowe's Logo


Woodpeckers Logo  Acme Logo 
Rockler Logo  Amazon Logo  


  1. Good product! Review by JR1

    I purchased a Bora MiteriX Angle Duplicator and was amazed at how easily it measures both inside and outside angles and then by simply slipping off one side of the duplicator, I was able to set my miter saw to cut the trim pieces to fit perfectly. Great product! I wish I'd have had this 20 years ago! (Posted on 6/27/17)

  2. Great Tool For Flooring Installation Review by Rockler Customer

    We are using this tool to install 1,000 sq ft of bamboo flooring and it has been invaluable. we have used it time and again to get the proper angle for cuts on what we consider to be valuable flooring. (Posted on 5/26/17)

  3. Great Tool Review by ProTool Review

    It takes a skilled craftsman to create perfect angles. Few of us ever get to work in environments where that kind of precision exists naturally. So, we have to adjust. We put trim on imperfect walls that went up on imperfect framing—so that all our clients see is a perfect results. It’s the finish work that makes or breaks the client’s expectations. Being able to measure exact angles to transfer to our miter saw cuts helps us hide or fix what’s less than perfect. The Bora MiteriX simply makes the process easy and precise, so we’re not wasting money on extra material or time on call backs.

    To read the full review visit

    (Posted on 10/11/16)

Write Your Own Review

You're reviewing: Bora MiteriX Angle Duplicator

  • Incorrect
UPC Code: 814000013980